Skip to content
MyToolers

How to Price Print Jobs: Paper, Ink, Press Time and Finishing

Price print jobs from real costs: paper, ink or clicks, press time, finishing and overheads, with a worked business card example and mistakes to avoid.

By the MyToolers team at 182 AdFlow (Dubai & Lahore) · Last updated:

Why print quotes so often lose money

A customer asks for 1,000 business cards, and the price is given in seconds — often copied from a nearby shop or remembered from last year. The job gets done, but at the end of the month the shop is busy and still short of cash.

A print job has more costs than paper and ink: press time, setup, wasted sheets, cutting, file checks and rent all come out of the price. Build a cost sheet once and you can reuse it for every similar job.

The five costs in every print job

1. Paper or stock. Work out how many finished items fit on one press sheet (called imposition, or “ups”), then how many sheets the job needs, then add an allowance for spoilage — test prints, colour adjustments and sheets damaged in finishing.

2. Ink, toner or clicks. Offset presses use ink; many digital presses are charged per printed side (a “click”) under a service contract. Use the cost per side from your contract or your own ink records, and remember that double-sided work counts both sides.

3. Press time. A machine costs money every month whether it prints or not: lease payments, servicing, electricity and the operator's wages. Divide those monthly costs by the hours it actually prints to get a machine hour rate.

4. Finishing and labour. Cutting, folding, laminating, packing and file checks take staff time. Charge an hourly rate, plus materials such as lamination film.

5. Overheads. Rent, front desk staff, software and phone bills must be covered by every job. Many shops add a fixed percentage to direct costs.

How to build a price, step by step

1. Write down the job specification: size, paper, quantity, colours, sides and finishing.

2. Work out the ups, sheets and spoilage, then cost the paper and the ink or clicks.

3. Add press time, finishing time and materials.

4. Add your overhead percentage to get the full cost.

5. Set the price from the margin you want and round it to a clean figure.

6. If you are registered for VAT or sales tax, add it on top and show it separately. The UAE standard VAT rate is 5%; in Pakistan, sales tax depends on federal and provincial rules. Confirm current rules with the Federal Tax Authority in the UAE, or your tax adviser in Pakistan.

A worked example: 1,000 business cards

The figures below are example costs only, not market prices — replace them with your own supplier prices, contract rates and wages. The job: 1,000 business cards, 90 × 55 mm, full colour on both sides, printed on SRA3 sheets (320 × 450 mm) on a digital press.

Ups: with 3 mm bleed on every edge, each card needs 96 × 61 mm. Three fit across the sheet (3 × 96 = 288 mm, within 320) and seven fit down (7 × 61 = 427 mm, within 450), so 3 × 7 = 21 cards per sheet. Sheets: 1,000 ÷ 21 = 47.6, rounded up to 48. Spoilage at 5%: 48 × 1.05 = 50.4, rounded up to 51 sheets.

Paper at AED 1.20 per sheet: 51 × 1.20 = AED 61.20. Clicks at AED 0.40 per side, two sides: 51 × 2 × 0.40 = AED 40.80.

Press time: the machine's monthly costs are AED 9,600 and it prints about 160 hours a month, so the hour rate is 9,600 ÷ 160 = AED 60. Setup and printing take half an hour: 0.5 × 60 = AED 30.00.

Finishing and files: cutting and packing take 15 minutes and checking the file takes another 15 minutes, at AED 40 per hour: 0.25 × 40 + 0.25 × 40 = AED 20.00.

Direct cost: 61.20 + 40.80 + 30.00 + 20.00 = AED 152.00. Overheads at 20%: 152.00 × 0.20 = AED 30.40, so the full cost is AED 182.40.

Price for a 30% margin: divide the cost by (1 − 0.30). 182.40 ÷ 0.70 = AED 260.57, rounded up to AED 265. Check: profit is 265 − 182.40 = AED 82.60, and 82.60 ÷ 265 = 31.2% margin. With 5% UAE VAT added, the customer pays 265 × 1.05 = AED 278.25.

Compare a 30% markup instead: 182.40 × 1.30 = AED 237.12. The profit of AED 54.72 is only 23.1% of that price — a common reason shops earn less than they think.

Why small runs cost more per piece

Setup and file checks take about the same time for 500 cards as for 1,000. With the same example rates, 500 cards need 500 ÷ 21 = 23.8, so 24 sheets, plus 5% = 25.2, so 26 sheets. Paper is 26 × 1.20 = AED 31.20, clicks are 26 × 2 × 0.40 = AED 20.80, press time of 0.4 hours is 0.4 × 60 = AED 24.00, and finishing stays at AED 20.00. Direct cost is AED 96.00; with 20% overheads it is AED 115.20, and at a 30% margin the price is 115.20 ÷ 0.70 = AED 164.57.

That is about AED 0.33 per card for 500, against about AED 0.27 per card (265 ÷ 1,000) for 1,000. So a price list needs quantity breaks, not one price per piece. On offset presses, plates and makeready make this gap even bigger.

Common mistakes to avoid

Pricing per piece without working out the ups. A small change in size or bleed can change how many fit on a sheet.

Forgetting spoilage and setup sheets, especially on jobs with lamination or folding.

Confusing markup with margin, as the example above shows.

Giving free design work and unlimited proof changes. State how many revisions the quote includes.

Not charging for rush jobs that push other work back or need overtime.

Using old paper prices instead of checking supplier rates regularly.

How MyToolers helps

The free Percentage Calculator works out what X% of a number is, the percentage change between two values, and a number increased or decreased by a percentage — handy for overhead percentages, spoilage allowances, VAT and checking your margin. The free Unit Converter helps when a customer gives sizes in inches and your sheets are measured in millimetres.

PrintFlow, our CRM for printing presses and print shops, keeps a Products & pricing list with the stock, finishing and default operator for each product, records every quote request with product, size, paper and quantity, and tracks ink, toner and paper usage per machine, so quotes start from the right numbers. You can explore it in the free live demo.

Related on MyToolers